Fixed-layer STP practice with low-level storm-relative helicity
Hold the other fixed-layer STP factors at one and the index becomes the 0–1 km storm-relative helicity divided by 150 m²/s².
Start with What happens at the knot-to-metre-per-second STP shear cutoff?.
| SRH (m²/s²) | Helicity factor | STP |
|---|---|---|
| 75 | 0.5 | 0.5 |
| 225 | 1.5 | 1.5 |
Worked example
For CAPE 1,500 J/kg, LCL 1,000 m AGL and shear 20 m/s, the non-helicity factors all equal one in the site equation. Compare 75 and 225 m²/s² of 0–1 km SRH. The indices are 0.5 and 1.5. The output is dimensionless and can exceed one.
Practice questions
- Find the result for SRH 75 m²/s².
- Find the result for SRH 225 m²/s².
- Double CAPE to 3,000 J/kg and keep SRH at 75 m²/s².
- Use SRH of 225 m²/s² but raise LCL to 1,500 m.
- A report gives only 0–3 km SRH. What input is missing?
- Why can STP equal 1.5?
Worked answers
Answer 1
75/150 = 0.5.
Answer 2
225/150 = 1.5.
Answer 3
The CAPE factor doubles to two and STP becomes 1.
Answer 4
The LCL factor becomes one-half and STP is 0.75.
Answer 5
The equation uses 0–1 km SRH. Recalculate it from the appropriate layer and storm motion.
Answer 6
It is a product of normalized environmental factors, rather than a calibrated probability bounded by one.
- 75/150 = 0.5.
- 225/150 = 1.5.
- The CAPE factor doubles to two and STP becomes 1.
- The LCL factor becomes one-half and STP is 0.75.
- The equation uses 0–1 km SRH. Recalculate it from the appropriate layer and storm motion.
- It is a product of normalized environmental factors, rather than a calibrated probability bounded by one.